Setting Up the Audio Options
1With the unit in Stop mode, press the MENU button.
2 | Select DVD using ,❷ buttons, then OK or ❿ button. | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Setup |
| ||
|
|
|
| Setup |
| ||
|
|
|
| Display Setup |
| ||
|
|
|
| Setup : |
|
|
|
|
|
|
|
|
|
|
|
|
|
| STB |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 | Select Audio Setup using ,❷ buttons, then press | ||||||
| the OK or ❿ button. | ||||||
4 | Use the ,❷ buttons to select the desired item. | ||||||
| Then press the OK or ❿ button. | ||||||
Dolby Digital Out
DTS
PCM Down Sampling
Dolby Digital Out
1.PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
2.Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Output.
➢Be sure to select the correct Digital Output or no audio will be heard.
MPEG-2 Digital Out
1.PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
2.Bitstream : Converts to
DTS
1.Off : Doesn’t output digital signal.
2.On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder.
Dynamic Compression
1.On : To select dynamic compression.
2.Off : To select the standard range.
PCM Down Sampling
1.On : Select this when the amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
2.Off : Select this when the amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
➢• How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or ➛ button.
•Manufactured under license from Dolby Laboratories. “Dolby” and the
•“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
