ENG-7
Inserting Batteries in the RemoteControl
You must insert or replace the batteries in the remote
control when you:
◆
Purchase the STB-DVD-VCR
◆
Find that the remote control is no longer
working correctly
1Push the tab in the direction of the arrow to release
the battery compartment cover on the rear of the
remote control.
2Insert two AAA, RO3 or equivalent batteries,
checking for polarities:
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
3Replace the cover by aligning it with the base of
the remote control and pushing it back into place.
➢
Use same types of batteries
1
Display Indicators
108 9
7
1The DVD Deck is active.
2ADVD, CD is loaded
3The time, counter position, time remaining or
current deck status is displayed
4VHS tape is inserted
5The VCR Deck is active
63D sound
7DTS disc
8STEREO indicator
9REC Mode
10 ATimer Recording is programmed or in progress.
1 2 3 4 5
6

TV

1
Connecting STB-DVD-VCR tothe TV using the RCA Cable
You can connect your STB-DVD-VCR to the television
using the RCAcable if any appropriate Line input is
available on the television. You thus:
◆
Obtain better quality sound and pictures
◆
Simplify the setting up procedure of your
STB-DVD-VCR
☛
Make sure that both the television and the STB-
DVD-VCR are switched off before connecting
the cables.
1Connect the aerial RF cable to ANT.IN on the rear
of your STB-DVD-VCR.
2Use the RCAAudio/Video cable to connect the
STB-DVD-VCR and the TV receiver.
3Use LINE OUTon the STB-DVD-VCR and LINE IN
on the TV.
3
2