![](/images/new-backgrounds/1313328/31332851x1.webp)
Searching for a Specific Sequence |
| Using the Tape Counter |
|
|
|
Index Skip Search
This feature will enable you to fast forward/rewind to a specific point on a tape: E.g. if you have recorded 3 different programmes on a tape and you have rewound the tape to the beginning, by using this feature you can go directly to the start of programme 2 simply by pressing the SEARCH button.
1After pressing the SEARCH, press the
corresponding or❷ buttons, until the Intro Scan option is selected.
2Press the OK or ❿.
3Press the ➛➛ or ❿❿ buttons twice more.
This will take you directly to the start of the desired programme is located.
4These Index searches can be made forwards: (press ❿❿) or backwards: (press ➛➛).
(➛➛ | ● | ● | 0 | ● | ● | +20 ❿❿✌ |
5To cancel an Index search simply press the ❿II or ■ button.
INDEX SEARCH : ➛➛
The tape counter:
◆Indicates the elapsed time in the play and record modes (hours, minutes and seconds)
◆Is reset when a cassette is inserted in the
VCR
◆Allows you to find the beginning of a sequence easily
☛If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.
1Insert a cassette in your
2To set the tape counter to zero at the beginning of a sequence:
◆Press INFO. twice to display the counter
◆Press CLEAR when you want to set the tape counter to zero
0:00:00
3When you are ready,
◆Start playback or Recording.
◆Press the ■ button.
◆To
❿❿.
➢Some
Press INFO.:
◆Once to display the current function, programme number, recording speed, date, time and counter
◆Twice to display the counter only
◆Three times to display the time remaining on the cassette
◆Four times to clear the display