Samsung SV-DVD54T Recording a Programme Immediately, Recording a Programme with Automatic Stop

Recording a Programme

Immediately

Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video source). If you have not done so, refer to pages 11.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your STB-DVD-VCR (or the LINE input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.

4Select:

◆The station to be recorded using the PROG

( or ) buttons and SELECT (VCR or STB) buttons or

◆The LINE1, LINE2 source using the INPUT SEL. button for external video source

Result: The station number is displayed and the programme can be seen on the television.

5Select the recording speed by pressing the SPEED button as many times as required (see page 17).

6Hold the REC button (●) down for a while to start recording.

Result: The record indicator appears on the television and STB-DVD-VCR display. An index is recorded on the tape (see page 24).

7To stop recording, press ■ once.

➢◆ If your STB-DVD-VCR ejects the cassette when you start recording, check to make sure that the cassette’s safety tab is intact or that the opening (created by a broken safety tab) is covered with adhesive tape.

◆If you reach the end of the tape while recording, the cassette rewinds automatically.

◆If STB view changes to VCR view during recording, the change of channel is impossible.

◆VCR function key is not operated for Play, FF, REW on STB view.

Recording a Programme with Automatic Stop

This function enables you to record up to nine hours (LP) of programmes.

Your STB-DVD-VCR stops automatically after the requested length of time.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your STB-DVD-VCR (or the LINE input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.

4Select:

◆The station to be recorded using the PROG

( or ) buttons and SELECT (VCR or STB) buttons or

◆The LINE1, LINE2 source using the INPUT SEL. button for external video source

Result: The channel number is displayed and the programme can be seen on the television.

5Select the recording speed by pressing the SPEED button as many times as required (see page 17).

6Hold the REC button (●) down for a while to start recording.

Result: The record indicator appears on the television screen and STB-DVD-VCR display. An index is recorded on the tape

7Press the REC button (●) several times to increase the recording time in:

◆30-minute intervals up to four hours

◆1-hour intervals up to nine hours

Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the STB-DVD-VCR stops recording automatically and power off.

8If you wish to cancel the recording before the end, press STANDBY/ON.

☛If the end of the tape is reached while recording:

◆The recording stops and power off.

☛This function is not available in DVD recording

LENGTH 2:30

SET LENGTH :

PRESS REC ●

ENG-18