Selecting the Colour Mode, Channel | Samsung SV-DVD54T manual

Setting the STB-DVD-VCR Output		Selecting the Colour Mode
Channel
Channel

Your STB-DVD-VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures.

Also, you can change the STB-DVD-VCR output channel to adjust the frequency in which information is displayed on the screen.

1After pressing the MENU, press the OK or ❿. Result: The Setup menu is displayed.

2 Press the corresponding	,❷ buttons to select
the Install option.

3Press the OK or ❿ to select this option. Result: The Install menu is displayed.

					Install			CH 28
		Auto Setup			:
		Manual Setup						CH 38
								CH 38
				38				:
								:

CH 69

4Press the or ❷ buttons, until the VCR Output CH option is selected.

5Select the required output channel (CH28~CH69) by pressing the OK or ❿ buttons

➝ CH28 ➝ .. CH38 ➝ .. CH69

6On completion, press RETURN to exit the menu. Then tune your television again (see page 9).

Before recording or playing back a cassette, you can select the required system standard.

Otherwise, the system automatically selects the reception standard when you select AUTO.

➢◆ When playing back a cassette, the standard is automatically selected by the STB-DVD-VCR.

◆When you playback an NTSC-recorded tape on this STB-DVD-VCR make a setting on the colour system according to your TV.

If your TV is Multi System TV (NTSC 4.43 compatible), set NT4.43 and you can record NT4.43.

1After pressing the MENU, press the OK or ❿. Result: The Setup menu is displayed.

2 Press the corresponding ,❷ buttons to select the User Set option.

3Press the OK or ❿ to select this option. Result: The User Set menu is displayed.

						User Set			Auto
				Colour System	: Auto				PAL
			IPC		: On				MESECAM
			G-Code Extend		: Off				B/W

4 Press the corresponding or ❷ buttons, until the Colour System option is selected.

5Press the OK or ❿ button to select Auto ➝ PAL ➝ MESECAM ➝ B/W.

Auto	When playing back a cassette, the system
	standard is automatically selected by the
	STB-DVD-VCR.
B/W	Black and White

6On completion, press RETURN three time to exit the menu.

ENG-14

Image 15

Samsung SV-DVD54T instruction manual Selecting the Colour Mode, Channel, CH28 .. CH38 .. CH69, Black and White

Contents

SV-DVD54T Remote Control Overview Contents STB Functions DVD Functions Solving Problems Following illustrations represent precautions Safety Instructions Characteristics Disc Type and Characteristics Accessories Front View of the STB-DVD-VCRRear View of the STB-DVD-VCR Use same types of batteries Display IndicatorsInserting Batteries in the Remote Control DVD Deck is active DVD, CD is loaded Select the required language by pressing Or ❷ buttons Plug & Auto Set up Switch on the television Tuning Your Television for Setting the Date and Time Setting the Menu Language Open MenuSelect Language Install option Presetting the Stations Automatically Install option Presetting the Stations Manually Same time on the television screen Clearing a Preset StationChanging the Preset Station Table Press the Clear button Black and White Selecting the Colour ModeChannel CH28 .. CH38 .. CH69 On completion, press Return three times to exit the menu Intelligent Picture Control Auto Power Off option is selected Auto Power off Screen Messages Selecting the Cassette Type Repeat PlayProtecting a Recorded Cassette Recording a Programme Immediately Recording a Programme with Automatic StopHold the REC button down for a while to start recording Check that the date and time are correct Using the G-CODE FeatureBefore presetting your STB-DVD-VCR Up to six programmes can be preset If you wish to Then Modifying G-code Programming If you have forgotten which programmes will be recorded Using the Timer Programming FeatureChecking a Preset Recording You can check your preset recordings Playing a Cassette Cancelling a Preset RecordingAdjusting Picture Alignment Manually Selecting the Audio Output Mode You can play a cassette in slow motion Playing a Cassette in Slow MotionPlaying a Sequence Frame by Frame Playing a Sequence at Variable Speeds Intro Scan Searching for a Specific SequenceGo To 00000 Stop End Search Tape counter Using the Tape CounterTo cancel an Index search simply press the ❿II or button Index Skip Search Recording from Another VCR or Camcorder Connecting an RCA Audio/Video Input Cable Using the TV Buttons on the Remote Control Choosing a Connection DigitalWith the unit in Stop mode, press the Menu button Recorded Setting Up the Language FeaturesOK or ❿button Press the ,❷ buttons to select English Dynamic Compression Setting Up the Audio OptionsDolby Digital Out MPEG-2 Digital Out Ntsc Disc Output Setting Up the Display OptionsTV Aspect Black Level There are up to 8 rating levels on a disc Setting Up the Parental ControlAbout the Change Password Use ,❷ to select Change Password Before You Begin Receiver Connections Special Playback Features If you are using a 43 TV Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 169 TV Using the Display Function When Playing a DVD/CDTo make the screen disappear, press the INFO. button again Using the Angle button Using the Subtitle buttonChanging the Camera Angle When playing a DVD Using the Audio buttonRepeat Play Selecting the Audio Language Clearing a Mark Using the Mark Function MP3/WMA PlayUsing the Mark Function DVD Recalling a Marked Scene Return to the Album Screen MP3/WMA Play Picture CD PlaybackCD-R MP3/WMA discs Your MP3 or WMA files should be ISO 9660 or Joliet format Seconds, the menu will disappear CD-R Jpeg Discs Select Soundtrack Volume ControlTo control the volume level STB Function Main Menu Subtitle Select VideotrackSelect Favorites Programme Information Use the ,❷ keys to select a Teletext VBI you want InstallationTeletext VBI To change the Teletext VBI This cause your previous settings to be deleted Channel OrganisingAt the request window Parental Lock To delete channels from Favorite GroupSelect a channel list to delete with ,❷ or ❿❿ keys This will take you to the following menu Parental Lock System SetupTo cancel the lock Press the INFO. key again in order to cancel the lock Output Technical Specifications VCR / DVDGeneral Input Technical Specifications STB DemodulatorRF Input Problem Explanation/Solution Troubleshooting Guide VCR Troubleshooting Guide DVD Before requesting service troubleshootingProblem Action Troubleshooting Guide STB Problem Possible cause Solution of the problemChannel data Or Manual scanning menu Does not exist AK68-00467C