3.1STANDBY (
) Button
3.1.1Press STANDBY ( 
) button to turn on the set (the indicator shows yellow) when the set is in STANDBY mode (the indicator shows red) , the channel position number is displayed
in the screen. Press STANDBY ( 
) button to return the set to the STANDBY mode when the set is in OPERATION mode, and the indicator shows red.
3.2CHANNEL PRESET
3.2.1AUTO PRESET
3.2.1.1Press PRESET ON/OFF button to set PRESET mode. The current band and channel position will be displayed on screen. (In green)
3.2.1.2Press AUTO PRESET button, the appliance will search for the signal of TV stations in the order of VHFL, VHFH and UHF as shown in the following and memorise them from channel number 1 position.
VHFL 
VHFH 
UHF 
3.2.1.3When presetting is over, the channel position is set to number 1 automatically.
3.2.1.4Press PRESET ON/OFF button to exit preset mode.
NOTE: * During presetting, the green bar turns into yellow.
The moving bar indicates the change of tuning frequencies.
* During presetting, auto presetting will be cut off if any one of STAND BY button, PRESET ON/OFF button or AUTO PRESET button is pressed.
3.2.2 MANUAL TUNING
3.2.2.1 Press PRESET ON/OFF button to set preset mode. 3.2.2.2 Select a channel position.
If "SKIP" displays on the screen, press "SKIP" button to exit "SKIP" mode.
8 SKIP
llllllllll.....
SKIP
8 VHFH
lllllllll.....
3.2.2.3Press and hold MANUAL TUNING button until your desired program appears.
VHFL 
VHFH 
UHF
MFT 
VHFL
VHFH 
UHF
3
