Palsonic 4910 owner manual System Selection, Press, Auto Pal Ntsc

OFF TIME

0 : 00

OFF TIME

23 : 30

TIME SET

4.9.8.8Press TIME SET button, then the OFF TIME indication is green instead of red. OFF TIME function starts operating.

4.9.8.4The appliance will be turned off when your setting time is up, and return to stand by mode.

NOTE: * The built-in clock employs the 24-hour system.

*The OFF TIME function will be ineffective if the following condition occurs: Press STAND BY button before the setting time is up.

Switch off the power before the setting time is up.

4.10SYSTEM SELECTION

4.10.1FUNCTION AND OPERATION.

When you press the SYSTEM button, "AUTO" "PAL" "NTSC" will display on the screen respectively.

Press

SYSTEM

AUTO PAL NTSC

Press it again

SYSTEM
OSD	COLOUR SYSTEM	Colour Sub-Carrier	Vertical Frequency
AUTO	PAL-BG	4.43MHz	50Hz
	NTSC 3.58 only video	3.58MHz	60Hz
PAL	PAL-BG	4.43MHz	50Hz
	PAL 60 only video	4.43MHz	60Hz
NTSC	NTSC 4.43 only video	4.43MHz	60Hz

4.10.2Please set the "AUTO" mode by SYSTEM button normally when you watch TV broadcasting program (PAL-B/G) or NTSC 3.58 (video) program.

Please set "PAL" mode only when you watch PAL-60 program. Please set "NTSC" mode only when you watch NTSC 4.43 program.

NOTE:

When:you don’t understand the system of the program, the picture may be no colour. At this time, press SYSTEM button to select the system until the colour picture displays on the screen.

12