This equipment has been designed and manufactured to meet the highest international standards, but, like any electrical apparatus which is operated at mains voltage, care must be taken if you are to obtain the best results and safety is to be assured. This is particularly important with audio and TV equipment.

DO

read this handbook carefully and keep it handy for ready reference.

DO

ensure that all electrical connections (including the mains plug, extension leads and

 

interconnections between pieces of equipment) are properly made and in accordance

 

with the manufacturer’s instructions. Check that the mains fuse rating is correct.

DO

always call in your dealer if you are ever in doubt about the installation, operation or

 

safety of your equipment, he is the best person to advise you.

DO

unplug the power cord if the appliance is left unused.

DON'T obstruct the necessary all round ventilation: moderate heat is generated when product is operating - ensure installation is clear of curtains etc. Do not obstruct cooling vents on rear of cabinet.

Remember that to obtain the best performance and lasting satisfaction from your equipment : -

have it regularly maintained by a reliable service organisation: ensure that it is correctly used by all the family.

.

.

ABOVE ALL:-

Never let children push anything into holes or slots in the cabinet - this could result in an electric shock.

Never guess or take chances with electrical equipment of any kind-it is better to be safe than sorry.

..

...

.

.

WARNING:

To prevent fire or shock hazard do not expose this appliance to rain or moisture.

No user serviceable parts inside. Refer servicing to qualified service personnel. Never remove covers unless qualified to do so; this unit contains dangerous voltages.

LOCATION:

LOCATE appliance in the room where direct light does not strike the screen.

ALLOW adequate space between the appliance and the wall to permit proper ventilation. AVOID excessive warm and dusty location to prevent possible damage to the cabinet and component failure.

NEVER install the appliance in a strong magnetic field. CONNECT the appliance to AC 230 or 240 V, 50Hz outlet

1

Page 3
Image 3
Palsonic 5169 owner manual Above ALL