3.1 STANDBY ( ) Button
3.1.1 Press STANDBY ( ) button to turn on the set (the indicator shows yellow) when the set
is in STANDBY mode (the indicator shows red) , the channel position number is displayed
in the screen. Press STANDBY ( ) button to return the set to the STANDBY mode when
the set is in OPERATION mode, and the indicator shows red.
3.2 CHANNEL PRESET
3.2.1 AUTO PRESET
3.2.1.1 Press PRESET ON/OFF button to set PRESET mode. The current band and channel
position will be displayed on screen. (In green)
3.2.1.2 Press AUTO PRESET button, the appliance will search for the signal of TV stations
in the order of VHFL, VHFH and UHF as shown in the following and memorise them
from channel number 1 position.
3.2.1.3 When presetting is over, the channel position is set to number 1 automatically.
3.2.1.4 Press PRESET ON/OFF button to exit preset mode.
NOTE: * During presetting, the green bar turns into yellow.
The moving bar indicates the change of tuning frequencies.
* During presetting, auto presetting will be cut off if any one of STAND BY button,
PRESET ON/OFF button or AUTO PRESET button is pressed.
3.2.2 MANUAL TUNING
3.2.2.1 Press PRESET ON/OFF button to set preset mode.
3.2.2.2 Select a channel position.
If "SKIP" displays on the screen, press "SKIP" button to exit "SKIP" mode.
3.2.2.3 Press and hold MANUAL TUNING button until your desired program appears.
3
UHFVHFL VHFH
llllllllll.....8 SKIP
SKIP
lllllllll.....8 VHFH
UHF
UHF
VHFH
VHFH
VHFL
VHFL
MFT