Palsonic 6158 owner manual Channel selection, Using direct select buttons, Using CH button

Press CH button to select item (the selected item is highlighted). Press MENU button to exit to the main menu.

1) STD (colour system) selection.

In this TV model the colour system is automatically identified. In normal circumstances, please set colour system to AUTO.

2) SYS (sound system) selection.

In this TV model this item is ineffective. (Refer to the NOTE on page 6)

3) BLUE ON/OFF selection.

Select and highlight BLUE ON/OFF. Press VOL button to select ON or OFF. When "BLUE ON" is selected, blue background will appear on the screen automatically when no input signals, and the sound is mute. After 5 minutes the set will cut off automatically.

Channel selection

1.Using direct select buttons

1)Single digital method ( 0~9 ).

You can select any one of 0~9 channel position directly by pressing the number button accordingly.

Press "0"

AUTO

SYS 1

Press " 5 "

AUTO SYS 1

2) Two digital method (10~99).

Press "-/--" button until the symbol "--" is displayed on the screen. In this mode you can choose any one of two digit channel by pressing the number buttons accordingly. For example, if you wish to receive channel 25, press "2" button, then press "5" button.

Press "-/--"

- -

Press " 2 "

2 -

Press " 5 "

25 AUTO SYS 1

Two digit mode

2. Using CH button

Press CH button, the channel number will be increased or decreased progressively.

3. Making use of button

Press button to swap the currently viewed channel with the previous channel.

1 AUTO SYS 1

Press

20 AUTO SYS 1

11