Installation and appearance
Antenna connection
To ensure a bright - coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial.
Note: In case of using the 
) for UHF/VHF aerial, use a
When using the coaxial cable (not supplied) (75
) for UHF/VHF aerial, connect the plug into the 75 ohm aerial socket directly.
Note:
When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the power switch on the TV while connecting the antenna lead.
In thunder and lightning, weather, please disconnect the connection to the outdoor aerial to avoid thunder/lightning strike.
Battery Installation: | Effective range of the remote control |
1) Remove the back battery cover. | operation |
|
2)Insert two size AAA batteries according to the polarity indication inside the remote controller.
1. When the remote controller is not used for an extended period of time or the batteries are worn out, please remove the batteries in time to avoid battery leakage.
2. Avoid moisture and mechanical shock to the remote controller.
4
