Palsonic 6827G owner manual To preset channels Manual search

OPERATION

Tuning in (continued)

Use the MANUAL SEARCH function if desired channels can not be preset with the

AUTO SEARCH or if you would like to preset channels to specific position numbers one by one.

It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions.

To preset channels (Manual search)

Manual search

If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual search.

1.

Press the MENU button repeatedly to enter into the

(PRESET) menu, or press the

or

POSITION

008

button to select POSITION. Press

the

BAND

VHFL

or button to select a desired position

SKIP

OFF

number (from 0~255)

SEARCH

MFT

Note: press the

or

button to select a channel number

AUTO MEMORY

lllllllllllll

within 0.7 seconds. Press and hold the

or

button

lllllllllllllllllllllllllllllllll

for over 0.7 seconds to select a decimal number

2.

Press the

or button to select SEARCH.

Press the

button to search channels from

POSITION

008

current channel to higher channel (the screen

BAND

VHFL

displays glittering ("

").

SKIP

OFF

SEARCH

Press the

button to search channels from current channel to

MFT

lower channel (the screen displays glittering ("

"). When a

AUTO MEMORY

lllllllllllll

channel is located, the searching stops, this channel is then

lllllllllllllllllllllllllllllllll

memorised with the preset position number.

POSITION

008

Note: you can also make use of BAND selection to quicken the

BAND

VHFL

searching process in your desired band. Press the

or

SKIP

OFF

SEARCH

button moves the band to the next step in the sequence below.

MFT

AUTO MEMORY

lllllllllllll

VHFL

VHFH

UHF

lllllllllllllllllllllllllllllllll

3. When you want to store another channel at another position, repeat steps 1 & 2 above.

9