Palsonic DVD3000 the TV input.

the TV input.

Switch on the stereo system’s power if the player has been connected to a stereo system.

Press the power switch key in the remote control unit, the DVD player will enter into its standby status,

press the key again, the player will work normally.

As this key does not control the power supply switch, please turn off the power switch after enjoying the discs.

1. Press the power button (1) in the front panel to turn on the power supply, the TV screen will display the initial

image.

2. Press OPEN/CLOSE button (or the open/close key in the remote control unit) to open the disc tray.

3. Place the disc onto the tray.

Holding the disc without touching either of its surfaces. Place the disc with the printed title side facing up,

align it with the guides, and place it in its proper position.

4. Press the PLAY button [or the (confirm/play) key in the remote control unit]

The disc tray is automatically closed and play commences if there is no menus recorded on the disc.

If the disc has one or more titles recorded on it, a menu screen will appear on the TV monitor after a few

minutes. key or number key to select the preferred title.

(2)Press (confirm/play) key to commence the playback of selected item.

After operation:

When the unit is not in use, remove the disc and press the power button to turn off the player.(to see chapter"

Basic play" for more detail).

Press “title menu” key in the remote control unit, the playing will stop and the monitor will show a menuimage.

Title selection: Some movie disc may have two or more titles. If the disc has a title menu recorded on it,

you can press the “title menu” key to select the movie title (The details of operation differ depending on the

disc used).

1. Press the “title menu” key during play, a list of the titles on the disc is now displayed. press the “title menu”

key again will resume play from the scene when the “title menu” key was first pressed.

2. Press key to select the preferred title.

3. Press the (confirm/play) key to commence the playing of the selected title .

In PBC OFF status, press "catalouge menu”, nine small pictures will be showed in the TV monitor step by step

and you can select any one purposely.

Press the STOP button ( or the

stop key in the remote control unit).

Press the FSW or REV button (or the key in the remote control unit).

Press first time means playing in double speed (2X), press it again means playing in four speed (4X), press

it third time means playing in six speed (6X), the fastest speed is eight speed (8X).

Normal play is resumed when the key “(confirm/play)” is pressed.

Skipping ahead Press the " HI " button (or the " " key in the remote control unit) during play. A chapter

is skipped forward each time the button is pressed.

Skipping back

Press the " " button (or the " " key in the remote control unit) during play . A chapter is skipped

backward each time the button is pressed.

(1)Press