PDM-103
Compact Disc PlayerInstruction Manual
IMPORTANCE NOTICE
1This product does not contain a separate Power On/Off switch. After inserting a disc and installing batteries/AC adaptor, simply press the Play button to switch on and ply disc.
2In order to maximise battery life and provide optimum playing time this product incorporates an Auto Power Off Function. The power to the player will automatically switch off approxi- mately 30 seconds after a disc has finished playing or when the CD lid is opened.
TABLE OF CONTENTS | SAFETY PRECAUTIONS |
| SPECIFICATIONS | |
|
|
|
Program Play: Up 20 memory |
| Dimensions: 136 mm (W) x 30 mm (H) x 150 mm (L) |
Line output: 0.6V +/- 0.2V |
| Weight: 250g (without batteries) |
Earphone: 16mW |
| Power requirements: DC 4.5V external and Battery, 3V "AA" |
|
| Cell x 2 (LR6, MN1500 or |
* For improvement purposes, specification and design are subject to change without notice
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111 FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Power | 1 |
Charging and Use of Rechargeable Batteries .... | 2 |
Earphone and | 3 |
Player Maintenance | 4 |
Disc Cleaning and Troubleshooting Guide | 5 |
Product Specifications | 6 |
Player Operation |
|
Basic Disc Play | 7 |
LCD Display Information | 8 |
Repeat/Play Modes | 9 |
Intro Scan and Random Play | 10 |
Programmed Track Play | 11 |
Location of Controls | 12 |
Skip and Search Functions | 13 |
WARNING
To prevent a shock hazard, do not expose the unit to rain a moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
1.As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing.
2.Stop operation immediately if any liquid or solid object should fall into the cabinet. Unplug the unit and have it checked by qualified personnel.
3.Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not operate properly.
4.Do not put anything in the safety slot. If you do, the laser diode will be ON when the lid is still opened.
5.If the unit is not to be used for a long period of time, make sure that all power sources are disconnected from the unit. Remove all batteries from the battery compartment, and unplug the AC adaptor from the wall outlet. Make it a practice to remove the AC adaptor by grasping the main body and not by pulling the cord.
6.The unit employs a laser. The use of controls or adjustments or performance of procedures other than those specified herein may result in exposure to hazardous radiation.
1
1. POWER SOURCE NORMAL BATTERIES/AC ADAPTOR
2
2. CHARGING AND USE OF RECHARGEABLE BATTERIES
Battery Power Operation
1.Open the battery compartment cover and insert two "AA" alkaline batteries inside the battery compartment. Follow the polarity as indicated in the battery compartment.
2.Close the battery compartment cover.
Note: Zinc/Carbon, or Zinc/Chloride type batteries are not recommended for this unit as their use will result in extremely short playing times. Wherever possible and for economy it is recommended that the mains adaptor supplied with this unit is used.
AC Operation
1.Insert the DC plug, at the end of the AC adaptor cord into the DC input jack, on the side of the unit.
2.Plug the AC adaptor into a 230V AC power outlet socket.
Note
If the AC plug of this unit does not fit in your AC outlet, a plug adaptor (not included) should be used.
Consult your local dealer on the type of plug adaptor required.
Rechargeable Battery Operation
This unit can fully recharge the specified rechargeable battery, in approximately 15 hours The rechargeable batteries (NOT suppled) should be recharged before they are used for the first time because they are low in power or if they have not been used for a long period (over 60 days).
1.Open the battery compartment cover and insert two of the recommended rechargeable batteries, matching polarity (12V 650mA).
BOTH BATTERIES MUST BE OF RECHARGEABLE
RECHARGE SWITCH
2.Plug in the AC adaptor and set the Recharge switch to ON position to start charging and Recharge indicator will light on.
USE ONLY THE AC ADAPTOR SUPPLIED WITH THE SET FOR CHARGING.
3.After 15 hours. Please unplug the AC adaptor and switch the Recharge switch to the off position
DO NOT CHARGE CONTINUOUSLY FOR 24 HOURS OR MORE. DOING SO CAN CAUSE THE PERFORMANCE OF THE RECHARGEABLE BATTERY TO DETERIORATE.
Note You may play DISC'S whilst charging the batteries.
4.If the operating time decreases drastically when when the rechargeable
5.When charging for the first time or after a long time, playing time may be reduced. In this case, charge and discharge the batteries several times.
3
4
