LISTENING TO RADIO
Manual Tuning
1.Set Function Selector to "Tuner" position.
2.Set Band button to the desired band.
3.Press Manual Tuning "UP" button or Manual Tuning "DOWN" button until your desired station is reached.
4.Adjust the volume control to the appropriate level as desired.
Auto Tuning
1.Follow steps 1, 2 of "Manual Tuning".
2.Press UP or DOWN button continuously to start the automatic tuning.
3.To terminate Auto Tuning, press the UP or DOWN button again.
| PROGRAM INDICATOR | |
BAND |
|
|
INDICATOR |
|
|
STEREO |
|
|
INDICATOR | FREQUENCY INDICATOR | STATION NO. |
|
|
Preset Stations by Remote Handset
This unit equipped 10 preset station for FM and MW, 5 station for LW if LW is available. Once they are preset broadcasting corresponded to those can readily be enjoyed by simply pressing the Preset Station button.
1. Set in Tuner mode.
2. Your desired station can be received by "Manual Tuning" or "Auto Tuning".
3. Press the MEMORY button (at Remote), to enable program state.
4. Press the
5. Frequency is written in the Preset a Memory by pushing MEMORY button once again.
6. Repeat step 2 to step 5 to enter additional channels into Program.
.7. To return normal Tuner mode, leave keys free.
Calling the Preset Stations
Press the
FM. & FM-Stereo Reception
Set FM mode selector at "MONO" position. Programs are received in Mono mode. In particular when
. stereo signals are weak, it is preferable to receive the program in MONO. Set FM mode selector at "STEREO" position for receiving stereo programs.
Beat Cut
When beats are produced while listening to recording an AM broadcast, active the beat cut switch so the beats are eliminated or minimised.
PLAYING COMPACT DISC
Getting Started
1.Set Function Selector to CD mode. lift up the CD door and put a disc into the Compact Disc Compartment, then close the Compartment.
2.The Display will show "00" for a few seconds, then the total number of tracks and the total playing time of the disc.
3."DISC' will be displayed when there is no disc inside the compartment.
2