Note:

Selecting input source

Note:
Basic operations

Turning On/Turning Off/Selecting input signal/Menu introduction

Turning On

13
CH- VOL-
CH+ VOL+
MENU
CH+
VOL-
MENU
VOL+
CH-
Insert the power plug to wall outlet, then the red indicator lights
up and the unit is in STANDBY mode.
Press the POWER button on the unit's control panel or the
button on the remote control to turn on (the indicator turns to
yellow).
The TV will display the program before turning off last time.
Press the POWER on the unit or the button on the remote
control again. Then the TV is in STANDBY mode. The indicator
turns to red.
This TV set can automatically turn off (standby) by Sleep timer.
Please unplug the power cord from the wall outlet if not in
use.
Press the SOURCE button on the unit or on the remote control.
The screen displays AV/S-Video/PC/TV. Select your desired
input signal.
To resume TV mode, press the SOURCE button on the unit or
on the remote control repeatedly until the screen displays TV.
You can also press digit buttons or CH+/- buttons to resume TV
mode.
Press OSD button, the screen displays current mode. Press
again to cancel OSD.
All buttons in the manual are buttons on remote
control if without special indication.
SOURCE
OSD
2
1
3

Turning Off

2
1
3
SOURCE
POWER