Palsonic TFTV580 owner manual Adjusting Phase/Frequency, Adjusting Picture Position

Press UP/DOWN to select h position or v position item.

Press LEFT/RIGHT to adjust the value of the item until the screen is well- aligned.

20

Operations In RGB/YPbPr Mode

Adjusting Phase/Frequency

1 Access the Picture Position menu.

2 Press UP/DOWN to select phase or frequency item.

3 Press LEFT/RIGHT to adjust the selected item.

h position

v postion

frequency

phase

50

50

866

15

You may find that images blur, depending on the clock phase of your PC's Processor. If you experience blurring , you can obtain a clearer image by adjusting the phase item.

Adjust the clock frequency of the set's internal clock signal. If shimmering or rainbow-like noise is apparent in the image, try adjusting the frequency item.

Adjusting Picture Position

After connecting the unit to your PC, adjust the position of the screen if it is not well-aligned.

1 Access the Picture Position menu.

2

3

h position

v postion

frequency

phase

50

50

866

15