b Press the Up/Down navigation keys to open the list. Press the Up/Down navigations key to scroll in the list and highlight your headset.
c Press the Enter key to select the headset and close the list. Press the Enter key to exit edit mode.
11 Choose one of the following:
•If only one headset is paired, proceed to step 12.
•If more than one Bluetooth wireless headset is paired, the first headset paired is automatically made the active device. To make a different headset active, do the following:
— Press the Right navigation key to scroll in the list and highlight the Set button (next to the Set Active Device item).
— Press the Enter soft key.
The message "Set active: “device name”" is displayed. This means that the headset named is now the active wireless headset and is used when you press the headset key. Note: Check your headset's documentation to find its PIN (sometimes
called a passkey). Typically this value is 0000.
12 Press the Exit soft key to close the Bluetooth Setup menu and return to the main display. Changes are saved automatically.
Dual Pairing Headsets
Take special care when using a "dual pairing" type of Bluetooth wireless technology headset. The GN Netcom GN6210 is an example of such a headset. It can be paired to its base as well as to the
1140E. If it is paired to both, the 1140E is the second device, and the following applies: Press the headset "telephone" key:
•If a single tone sounds, the headset is connected to the base.
•If a double beep sounds, the headset is connected to the 1140E.
If the base is powered off, the headset is only paired to the 1140E and pressing the "telephone" key connects you to the 1140E.
Interaction with wired headsets
If you connect a Bluetooth wireless technology headset and a wired headset to the same IP Phone 1140E, the two interact as follows:
•If no wireless headset is paired, the wired headset works as normal. Likewise, if a wireless headset is paired with the set, but is not in range, the wired headset works as normal.
•If the Use BT headset check box is selected, the wireless headset is used as the phone headset.
— The Bluetooth wireless technology headset can work only if it is within range of the phone; as the wireless headset approaches the edge of its radio range, the audio quality
degrades and radio interference noise increases – this is also known as static. When the wireless headset is in connecting range, the Headset key controls the wireless headset, even if a wired
headset is attached. If a wireless headset moves out of connecting range, a special beep sounds in the headset indicating the connection was lost. For example, on the GN6210, this is a series of tones, high to low, the same as the beeps that sound when a call ends.
When you do not want to use Bluetooth wireless technology
If a wireless headset is connected, and you want to use the wired headset, you can switch between the two. It is not necessary to unpair or disable the Bluetooth wireless technology feature.
Note: Nortel recommends that you not pair more than one headset of the same model, because they have identical names in the Paired list.
Note: Unless you need to dual pair the GN6210 headset, operating the headset with the 1140E is simpler if it is only used with its
