Panasonic 4313 manual o A S B S i A S

	Type number
4313	Analog base with isolator
3390	Label holder (100 holders per packet, excl. labels)
3391	Labels for 3390 (10 sheets à 132 labels)

Ext.

LED

E +

The detector plugged in the base is connected on the SAo side.

Lss (33xx)

OUT

Lss (430x)

o A S

B S i A S

LED

50 mm

73 mm

E -

Al

IN

SAi Terminal for COM loop (in) SAo Terminal for COM loop (out)

SB Common terminal for COM loop in/out)

Al Address Label

Lss Locking screw stopper (for detector type 33xx and 430x respectively)

15

6.2

102 mm

E- Terminal for external LED E+ Terminal for external LED LED Isolator LED (yellow)

Isolator LED: Normal state = one blink 250ms / 3s. Isolated state = two blinks 250ms / 3s. NOTE! The LED is not visible when the detector is plugged in the base.

The base is prepared (Lss) for mechanical locking of detector with locking screw. Terminal wire diameter 0.6 – 1.6 mm (approx. 0.3 – 2 mm2).

Analog detector types 33xx and 430x can be plugged in the base 4313. The position of the detector's built-in LED is marked in the base for correct mounting position of the base.

		Technical data
Voltage (V DC)
allowed	12-30
normal	24 (COM loop voltage)
Current consumption at nom. volt.	Depending on the type of detector that is plugged into the base.
from COM loop (mA)
quiescent (excl. detector)	< 1.3
active (excl. detector)	< 1.3
Ext. LED terminals	Depending on the detector plugged in the base. Normally:
voltage (V)	5
max. current output (mA)	2
Ambient temperature (°C)
Operating	-10 to +50
storage	-20 to +60
Ambient humidity (% RH)	max. 95, non condensing
Ingress Protection rating (estimated)	IP54
Size ∅ x H (mm)	102 x 15
Weight (g)	80
Construction / Colour	ABS / Grey (N8, Munsell colour code)
Approvals		07 EC Certificate no. 0845-CPD-232.1567; EN54-17

All technical features and data are subject to changes without notice, resulting from continuous development and improvement.

Product Leaflet	Date of issue	Revision / Date of revision
MEW00853	2007-01-11	1 / 2008-09-24