Panasonic 8035, 8045 manual 169

No.	Parameter	Setting		Comments
022	Substitute RCV	Invalid	Selecting whether the machine receives to memory when the recording paper
		Valid	runs out, toner runs out or the recording paper is jammed.
024	Print Reduction	Fixed	Selecting print reduction mode.
			Fixed
		Auto		: Reduce received document according to setting of Parameter No.
				025 (Reduction Ratio).
			Auto	: Automatically determines and reduces the incoming document to
				print onto the paper loaded in the machine.
025	Reduction Ratio	70%	Selecting the fixed print reduction ratio from 70% to 100%. This parameter
		——	functions only when the fixed print reduction is selected on Fax Parameter
			No. 024 (Print Reduction).
		100%
026	Polling Password	(——)	Setting a 4-digit password for secured polling. (See pages 34, 36)
027	Polled File Save	Invalid	Selecting whether the machine retains the polled document in memory even
		Valid	after the document is polled once.
028	Stamp At Memory XMT	Invalid	Selecting whether the machine stamps the original documents when storing
		Valid	the documents into memory.
			(Depends on the Stamp setting on the Control Panel)
031	Incomplete File Save	Invalid	Selecting whether the machine retains the document in memory if the
		Valid	document is not successfully transmitted.
033	XMT Reduction	Invalid	Selecting whether the machine performs reduction when the transmitting
		Valid	original is wider than the recording paper used at the receiving machine.
037	Receive To Memory	(——)	Enter a 4-digit password for printing the received document(s) in memory by
			using “MODE SETTING”, “SELECT MODE”, “RECEIVE TO MEMORY”.
			When “RECEIVE TO MEMORY” is set to ON, this parameter is not selectable
			on the LCD display. (See page 104)
039	PIN Code Access	None	Selecting the access method (Prefix or Suffix) to dial a number with PIN Code.
		Suffix	(See page 106)
		Prefix
042	Conf. File Save	Invalid	Selecting whether the machine saves the confidential polled file even after
		Valid	the file is polled once.
043	Password-Transmit	(——)	Setting a 4-digit XMT-Password and selecting whether the machine performs
			and checks the XMT-Password of the receiving station when transmitting.
			(See page 98)
044	Password-Receive	(——)	Setting a 4-digit RCV-Password and selecting whether the machine performs
			and checks the RCV-Password of the transmitting station when receiving.
			(See page 98)
046	Select Receive	Invalid	Selecting whether the machine performs selective reception. (See page 110)
		Valid
052	Diagnostic Password	(——)	Setting the password for Remote Diagnostic Mode. Please ask your Panasonic
			Authorized Dealer for details.
053	Sub-Address Password	(——)	Setting a 20-digit password for secured sub-address communication.

Continue on the next page...

Setting Your Machine

169