Panasonic 900 MHz A NSWERING A N I NCOMING C, P LACING A N O UTGOING C

Using Your Telephone
10
ANSWERING AN INCOMING CALL
If the handset is in the charging unit when you receive
a call:
• Pick up the handset and remove it from the
charging unit. (The AutoTalk feature allows you
to answer the call immediately.)
• When you finish the call, place the handset back
in the charging unit. (The AutoStandby feature
automatically ends the call.)
If the handset is out of the charging unit when you
receive a call:
• Press TALK or any key on the numeric keypad.
PLACING AN OUTGOING CALL
When making an outgoing call from the 900 MHz
handset:
• Press TALK . You will hear a dial tone.
• Enter the number you are calling.
• To end the call, press TALK.
900 MHz User Guide.book Page 10 Friday, September 28, 2001 12:11 PM