Panasonic A210 manual Main menu Settings Calls Call Service Charge settings

Settings

Charge settings

You can check the service charge settings or reset the settings.

d Main menu > Settings > Calls > Call Service > Charge settings

1.[192] to scroll to the required setting 7 [5] (Select or Change)

(If one of the settings except for Auto display is selected, go to the next step.)

2.[5] (Edit) 7 Enter the PIN2 code 7 [5] (OK)

3.Follow the operation shown below:

	You can set the currency unit in which your service rate is
Currency	determined. Firstly, Personal rate must be entered.
	Enter the currency unit (max. 3 characters) 7 [5] (Save)
	You can set your personal rate. This is the cost that the
Personal rate	service provider charges for one unit of call time.
	[192] to scroll to Per unit: or Per min.: 7 Enter the
	value 7 [5] (Save)
	You can set the maximum cost of calls allowed.
	To set the Display credit:
Max cost	[192] to scroll to Display credit 7 [6] (Change) to
	switch on/off 7 [5] (Save)
	To set the Max cost:
	[192] to scroll to Max cost 7 Enter the credit limit 7
	[5] (Save)
Auto display	In Idle mode, the cost of the last dialled call is displayed
	automatically.

Note: The duration of one unit may vary between peak and off-peak times. Call charges can be calculated accordingly. However, the actual tariffs charged by your network operator may not be reflected in the calculation.

73