Unit Dolby Digital Decoder Amplifier Speaker or

Unit dts (digital theater systems) Decoder Amplifier Speaker

When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts bitstream is output from the unit Optical digital audio output connector. When the unit is connected to a Dolby Digital decoder or dts decoder, you can enjoy theater-quality audio in your home. [An optical digital audio cable (optional) is required when an optional Dolby Digital decoder or dts decoder is used.]

Notes on connecting an Optical

Unit

digital audio cable (optional)

 

Firmly connect the cable to the connector.

Optical digital audio cable (optional)

Dolby Digital Decorder/ dts processing (optional)

Initial Setup

IMPORTANT NOTE:

Caution for optical digital audio output connector:

When connecting an amplifier (with an Optical digital input connector) which does not contain the Dolby Digital or dts decoder, be sure to select “OFF” at “Dolby Digital” and “OFF” at “dts” of the Settings for DVD Operation “AUDIO OUTPUT” (see page 59). Otherwise, any attempt to play DVDs may cause such a high level of noise that it may be harmful to your ears and damage your speakers.

When a dts decoder is connected, please select “Bitstream” at “dts” of the Settings for DVD Operation “AUDIO OUTPUT”. If “OFF” is selected, there will be no sound. (See page 59).

Video CDs and CDs can be played as normal.

Note:

Some dts decoders which do not support DVD-dts Interface may not work properly with the unit.

Amplifier

Front

Speaker

Subwoofer

Surround speaker

Center speaker

Front

Speaker

Surround speaker

13

Page 13
Image 13
Panasonic AG 527DVDE manual Unit Dolby Digital Decoder Amplifier Speaker or, Digital audio cable optional