Panasonic AG 527DVDE manual The Universal Remote Control Setup, Universal Remote Control is

Cable Box Universal Remote Control Feature

Universal Remote Control is...

The Remote Control may be set up to control some basic DSS or Cable box functions.

The Universal Remote Control Setup

1Find your DSS box or Cable box

Brand Code Number from one of the charts on the next page.

2 Setup remote.

Hold down DSS CABLE and press number keys to enter code.

• If code number is 100 or greater, e.g., press 1 - 0 - 2 for 102.

3 Confirm code entry.

Press POWER* to turn selected unit

ON or OFF.

• See below for controllable functions in each mode.

Notes

• Please repeat the Universal Remote Control Setup after replacing remote control batteries.

• The remote control will not operate all DSS receivers or Cable Boxes made by the manufacturers listed.

If you get no results, your particular brand cannot be controlled.

Using the Universal Remote Control

(Available Buttons / Functions)

Once the remote control has been properly set up, you can select TV-VCR, FM, DVD, DSS or CABLE mode depending on which functions you wish to control.

Press , FM, DVD or DSS CABLE on the remote control to select the desired mode. (See below for buttons available in each mode.)

Set to , FM, DVD:

All TV functions, as well as functions of TV-VCR,FM, or DVD.

Set to DSS CABLE:

•Basic VCR functions, e.g. PLAY, REC, etc.

•CABLE/DSS function, e.g. POWER, ENTER, NUMBER keys (except 100 key), CH UP/DOWN.

32