Displaying Menus on the Viewfinder Screen
Operations on SUB menus
Selecting the desired item
1 Press the SHIFT/ITEM button.
Each time this button is pressed, the cursor (arrow) which indicates the selected item moves to the next item.
Cursor
Movement order
| ¢ RO P { |
|
|
†MA S T E R P E D | : | µ0 0 0 | |
MA S T E R D T L | : | µ0 0 | |
MA S T E R G AMMA : 0 . 4 5 | |||
R | G A I N | : | µ0 0 0 |
B | G A I N | : | µ0 0 0 |
R P E D E S T A L | : µ0 0 0 | ||
G P E D E S T A L | : µ0 0 0 | ||
B P E D E S T A L | : µ0 0 0 | ||
The item can also be selected using the UP and DOWN buttons as follows.
Changing the settings
Press the UP button to increase the setting.
ÁThe setting is incremented by 1 level each time the UP button is pressed.
Press the DOWN button to decrease the setting. ÁThe setting is decremented by 1 level each time
the DOWN button is pressed.
SHIFT/ | PAGE |
|
| |
ITEM |
|
| ||
| TCG |
| AUDIO IN | |
| FRONT | MIC | ||
UP | SET | REAR | MIC | |
LINE | ||||
|
|
|
|
| CH 1 | CH 2 |
| MENU | CUE | REAR MIC POWER | |
DOWN |
| |||
CH 1 |
|
| ON | |
SET |
|
| ||
MIX |
|
| ||
OFF |
|
| OFF | |
CH 2 |
|
| ||
Changing the ON/OFF selection
The setting switches to ON or OFF each time the UP (or DOWN) button is pressed.
Returning to the default settings
Align the arrow with READ FACTORY DATA on the “INITIALIZE” SUB menu page of the MAIN menu screen 4 of 4.
When the UP (or DOWN) button is now pressed, the initial (factory) settings will be restored. However, care should be taken as the camera ID, GENLOCK, CARD R/W SELECT and TIME/ DATE cannot be returned to the default settings.
Quitting the menu
Set the MENU SET/OFF switch to OFF.
ÁThe setting menu disappears from the viewfinder screen and the displays indicating the unit’s current status appear at the top and bottom of the viewfinder screen.
– 54 –
