Setup Menus
OPERATION menu
| Item |
| Setting |
| |
|
|
|
| Description of setting | |
No. | Superimposed | No. | Superimposed | ||
| |||||
display | display |
| |||
|
|
| |||
|
|
|
|
| |
|
|
|
|
| |
109 | MEMORY STOP |
|
| For setting whether to stop the tape when the CTL counter reading | |
|
|
|
| becomes zero during fast forwarding or rewinding. (This item functions only | |
|
|
|
| in the CTL mode.) | |
|
| 0000 | OFF | 0: The tape is not stopped. | |
|
| 0001 | ON | 1: The tape is stopped. | |
|
|
|
|
| |
110 | AUTO BACK |
|
| For setting the operating method in the | |
|
|
|
| (Specifies whether or not to use the AUTO BACK function, which rewinds | |
|
|
|
| the tape for a few seconds to eliminate gaps and distortion between | |
|
|
|
| segments.) | |
|
| 0000 | OFF | 0: No AUTO BACK function. | |
|
| 0001 | 1: Auto back is performed when switching to the REC PAUSE mode, after | ||
|
|
|
| which the unit remains in REC PAUSE status. (When PAUSE is | |
|
|
|
| cancelled, the tape is advanced and then recording starts.) | |
|
| 0002 | ALL | 2: In addition to the functions of setting 0001 | |
|
|
|
| performed when switching to the REC PLAY mode, immediately after | |
|
|
|
| which the tape is advanced and recording starts. | |
|
|
|
|
| |
111 | AFTER |
|
| For setting the status after | |
|
| 0000 | STOP | 0: For stopping the tape in the stop mode. | |
|
| 0001 | STILL | 1: For stopping the tape in the still mode. | |
|
|
|
|
| |
112 | CAP LOCK |
|
| For setting the capstan lock mode. | |
|
| 0000 | 2F | 0: Capstan locks at 2F. | |
|
| 0001 | 4F | 1: Capstan locks at 4F. | |
|
|
|
|
| |
113 | BATTERY SEL |
|
| For setting the type of battery. | |
|
| 0000 | 0: 12V battery | ||
|
| 0001 | 1: 13V battery | ||
|
| 0002 | 2: 14V battery | ||
|
|
|
|
| |
114 | FRZ MODE SEL |
|
| For selecting the output picture in the STANDBY OFF (HALF LOADING) | |
|
|
|
| mode when the TAPE/EE switch has been set to TAPE. | |
|
| 0000 | DIS | 0: The output picture is muted. | |
|
| 0001 | STBOFF | 1: The playback picture is frozen for output as soon as the STANDBY OFF | |
|
|
|
| (HALF LOADING) mode is established. | |
|
|
|
|
| |
115 | EJECT EE SEL |
|
| For selecting the video output and audio output while the tape was being | |
|
|
|
| ejected when the TAPE/EE switch has been set to TAPE. | |
|
| 0000 | EE | 0: The | |
|
| 0001 | BLACK | 1: The | |
|
|
|
|
|
The underlining indicates the factory setting.
INTERFACE menu
| Item |
| Setting |
| |
|
|
|
| Description of setting | |
No. | Superimposed | No. | Superimposed | ||
| |||||
display | display |
| |||
|
|
| |||
|
|
|
|
| |
|
|
|
|
| |
200 | ID SEL |
|
| For setting the ID information to be returned to the controller. | |
|
| 0000 | OTHER | 0: 20 25H is returned. | |
|
| 0001 | DVCPRO | 1: The DVCPRO unit’s own ID (F0 33H) is returned. | |
|
|
|
|
|
The underlining indicates the factory setting.
31