Panasonic AJ-DCP manual 37

Setup Menus

AUDIO menu

	Item		Setting
				Description of setting
No.	Superimposed	No.	Superimposed
	display		display
711	PB AUDIO SEL			For setting the audio tracks to be played back. (This function works in the
				50 Mbps mode.)
		0000	TR1/2	0: The sound recorded on tracks 1 and 2 is played back.
		0001	TR3/4	1: The sound recorded on tracks 3 and 4 is played back.
712	SDI IN SEL			For setting the audio SDI input channels for recording. (This function works
				when the optional SDI input/output board has been installed. When it has
				not been installed, “N/A” is displayed, and the function does not work.)
		0000	CH1/2	0: The SDI input CH1 and CH2 sound is recorded.
		0001	CH3/4	1: The SDI input CH3 and CH4 sound is recorded.
713	AUD REC IN			For setting the audio processing method at the point when digital audio
				recording is commenced.
		0000	CUT	0: Cut processing
		0001	FADE	1: V fade processing
714	EMBEDDED AUD			For setting sound multiplexing.
				(This function works when the optional SDI input/output board has been
				installed. When it has not been installed, “N/A” is displayed, and the
				function does not work.)
		0000	OFF	0: The sound is not multiplexed.
		0001	ON	1: The sound is multiplexed.
715	AUDIO IN SEL			This sets the audio signal input.
				(This function works when the optional SDI input/output board has been
				installed. When it has not been installed, “N/A” is displayed, and the
				function does not work.)
		0000	SW	0: Interlocks with the settings of the INPUT SELECT button.
		0001	ANALOG	1: Fixes the analog signal input setting.
		0002	SDI	2: Fixes the SDI signal input setting.

The underlining indicates the factory setting.

37