Error Messages
When trouble has occurred in the unit, one of the following error messages will be displayed on the tape counter.
Error No. | Description |
–d – Condensation (dew) has formed.
Error No. | Description | |
|
| |
E — 31 | This appears when the loading operations fails to be | |
completed within 4 seconds. | ||
|
E — 00
E — 01
E — 02
This appears when the servo has failed to lock for more than 3 seconds.
If “T&S&R” has been selected as the setup menu item No.003 setting, “SERVO NOT LOCKED” is displayed on the third line (amount of remaining tape line) of the monitor screen.
This appears when there is no head output (due to clogging, etc.) for more than 3 seconds.
“L” is displayed on the first line (counter line) of the monitor screen.
If “T&S&R” has been selected as the setup menu item No.003 setting, “LOW RF” is displayed on the third line (amount of remaining tape line) of the monitor screen.
This appears when the error rate has deteriorated (when the channel condition lamps have turned red). If “T&S&R” has been selected as the setup menu
E — 32 | This appears when the unloading operations fails to | |
be completed within 4 seconds. | ||
| ||
|
| |
E — 41 | This appears when the FG signal (rotational speed | |
signal) fails to be output from the cylinder motor. | ||
| ||
|
| |
E — 42 | This appears when the PG signal (phase signal) fails | |
to be output from the cylinder motor. | ||
| ||
|
| |
E — 43 | This appears when the cylinder motor speed is | |
abnormally high. | ||
| ||
|
| |
E — 44 | This appears when the cylinder motor speed is | |
abnormally low. | ||
| ||
|
| |
E — 51 | This appears when the FG signal (rotational speed | |
signal) fails to be output from the capstan motor. | ||
| ||
|
| |
E — 52 | This appears when the capstan motor speed is | |
abnormally high. | ||
|
E — 09
item No.003 setting, “HIGH ERROR RATE” is displayed on the third line (amount of remaining tape line) of the monitor screen.
This appears when a blank portion on the tape has been detected.
“N” is displayed on the first line (counter line) of the monitor screen.
If “T&S&R” has been selected as the setup menu item No.003 setting, “NO RF” is displayed on the third line (amount of remaining tape line) of the monitor screen.
When all the following conditions are satisfied, the part of the tape concerned is recognized as a blank part.
OWhen there is no output from any of the heads OWhen the playback data cannot be read OWhen there is no CTL signal
This appears when the fan motor has stopped.
“S” is displayed on the first line (counter line) of the monitor screen.
If “T&S&R” has been selected as the setup menu
E — 53 | This appears when the capstan motor speed is | |
abnormally low. | ||
| ||
|
| |
E — 61 | This appears when the supply reel motor has locked | |
up. | ||
| ||
|
| |
E — 62 | This appears when the | |
locked up. | ||
| ||
|
| |
E — 63 | This appears when the supply reel motor speed is | |
abnormally high. | ||
| ||
|
| |
E — 64 | This appears when the | |
abnormally high. | ||
| ||
|
| |
E — 65 | This appears when abnormal tension has been | |
detected. | ||
| ||
|
| |
E — 66 | This appears when the start or end processing | |
operation fails to be completed within 7 seconds. | ||
| ||
|
| |
| This appears when there is a communication error | |
E — 67 | between SERVO and AVSYS. There is a problem | |
| with the data. | |
|
| |
| This appears when there is a communication error | |
E — 68 | between SERVO and AVSYS. The data is fixed to |
E — 10 item No.003 setting, “FAN STOP” is displayed on the third line (amount of remaining tape line) of the monitor screen.
The power will be automatically turned off if the fan remains stopped for more than 5 minutes or so.
This appears when the reel base which operates in
E — 11 accordance with the size of the tape has locked up for more than 2.5 seconds.
| high or low. | |
| This appears when there is a problem in | |
E — 69 | communication between SERVO and AVSYS when | |
| the power is turned on. | |
|
| |
E — 6A | This appears when there is a communication error | |
between IF and FRONT. | ||
| ||
|
| |
| This appears when there is a communication error |
E — 21
This appears when the cassette down operation fails to take place even when 4 seconds have elapsed after the cassette was inserted.
Alternatively, it appears when the cassette fails to be ejected even when 4 seconds have elapsed after its ejection operation was performed.
E — 6B | between IF and AVSYS. There is a problem with the | |
| internal reference or external reference. | |
|
| |
E — 80 | This appears when there is a problem with the | |
supply voltage. | ||
| ||
|
| |
E — bA | This appears when the input DC voltage has | |
dropped below the undercut voltage (approx. 10.6V). | ||
|
38