Panasonic AJ-HD150 manual 88

Table of AUTO OFF Error messages

Counter display	Monitor display		Description	VTR operation
				(Restart condition)
CAP ROTATE TOO	CAP ROTA TOO	If the capstan motor speed is abnormally low, the		STOP
SLOW	SLOW	AUTO OFF lamp lights, and the message display
				(POWER OFF→	ON)
		flashes.
CAP TENSION ERROR	CAP TENSION ERROR	If an abnormal tension at the supply side is detected		STOP
		in the capstan mode, the AUTO OFF lamp lights, and			ON)
		the message display flashes.		(POWER OFF→
DEW	DEW	If condensation is detected, the AUTO OFF lamp		EJECT
		lights, the message display flashes, and the VTR is
		transferred to the eject mode. After the tape is		(Normal operation
		ejected, the drum rotates in order to eliminate the		resumed after
		condensation.		condensation is
		When the condensation has been eliminated, the		eliminated)
		AUTO OFF lamp and message display go off, and the
		VTR can be used.
		<Notes>
		1)	If condensation is detected in the eject mode, the
		2)	drum starts rotating as soon as it is detected.
			If condensation is detected when the cassette has
			been inserted, the drum rotation is stopped, and
			after the tape is ejected, the drum starts rotating.
DRUM ROTATE TOO	DRUM ROTA TOO	If the cylinder motor speed is abnormally high, the		STOP
FAST	FAST	AUTO OFF lamp lights, and the message display		(POWER OFF→	ON)
		flashes.
DRUM ROTATE TOO	DRUM ROTA TOO	If the cylinder motor speed is abnormally low, the		STOP
SLOW	SLOW	AUTO OFF lamp lights, and the message display		(POWER OFF→	ON)
		flashes.
E-FF	E-FF	If the tape start and tape end are detected simulta-		STOP
		neously either during or after loading, the AUTO OFF		(POWER OFF→	ON)
		lamp lights, and the message display flashes.
FRONT LOAD ERROR	FRONT LOAD ERROR	The AUTO OFF lamp lights and the message display
		flashes when the take-up reel has been rotating idly		STOP
		for a fixed period of time while the start/end		(POWER OFF→	ON)
		processing operation during loading (half position) is
		being performed.
FRONT LOAD MOTOR	FRONT LOAD MOTOR	If the cassette does not move up even when 6
		seconds have elapsed since the VTR was transferred
		to the eject mode, the AUTO OFF lamp lights, and the
		message display flashes.		STOP
		<Note>
				(POWER OFF→	ON)
		If the cassette does not move down inside the
		machine even when 6 seconds have elapsed since
		the cassette was inserted, the VTR is transferred to
		the eject mode.
LOADING MOTOR	LOADING MOTOR	When the unloading operation is not completed within
		6 seconds, the AUTO OFF lamp lights, and the
		message display flashes.		STOP
		<Note>
				(POWER OFF→	ON)
		When the loading operation is not completed within 6
		seconds, the VTR is transferred to the eject (unload-
		ing) mode.

– 88 –