Table of AUTO OFF Error messages
Counter display | Monitor display | Description | VTR operation | ||
(Restart condition) | |||||
|
|
| |||
|
|
|
|
| |
REEL DIR UNMATCH | REEL DIR UNMATCH | If the reel motor at the | STOP |
| |
|
| reverse direction, the AUTO OFF lamp lights, and the | ON) | ||
|
| message display flashes. | (POWER OFF→ | ||
|
|
|
| ||
|
|
|
|
| |
REEL TENSION ERROR | REEL TENSION ERROR | If an abnormal tension at the supply side is detected | STOP |
| |
|
| in the reel mode, the AUTO OFF lamp lights, and the |
| ||
|
| (POWER OFF→ | ON) | ||
|
| message display flashes. |
|
| |
SERVO COMM ERROR | SERVO COMM ERROR | When the servo microcomputer does not follow the | STOP |
| |
|
| instructions of the system control microcomputer even |
| ||
|
| when 10 seconds have elapsed, the AUTO OFF lamp | (POWER OFF→ | ON) | |
|
| lights, and the message display flashes. |
|
| |
|
|
|
|
| |
SERVO CONTROL | SERVO CONTROL | When there is no response from the servo micro- | STOP |
| |
ERROR | ERR | computer for 1 or more seconds, the AUTO OFF | ON) | ||
|
| lamp lights, and the message display flashes. | (POWER OFF→ | ||
|
|
|
| ||
|
|
|
|
| |
SERVO ERROR | SERVO ERROR | When only the servo microcomputer was reset in an | STOP |
| |
|
| instantaneous power failure, the AUTO OFF lamp |
| ||
|
| (POWER OFF→ | ON) | ||
|
| lights, and the message display flashes. |
|
| |
If the start/end processing operation is not completed, | STOP |
| |||
|
| the AUTO OFF lamp lights, and the message display | (POWER OFF→ | ON) | |
|
| flashes. |
|
| |
S REEL ROTA TOO | S REEL TOO FAST | If the supply reel motor should rotate at an abnormally | STOP |
| |
FAST |
| fast rate, the AUTO OFF lamp lights, and the message | (POWER OFF→ | ON) | |
|
| display flashes. |
|
| |
S REEL TORQUE | S REEL TORQUE | If an abnormal torque applied to the supply reel motor |
|
| |
ERROR | ERR | is detected or if an abnormal current flowing to the | STOP |
| |
|
| (POWER OFF→ | ON) | ||
|
| lamp lights, and the message display flashes. |
|
| |
|
|
|
|
| |
T REEL ROTA TOO | T REEL TOO FAST | If the | STOP |
| |
FAST |
| normally fast rate, the AUTO OFF lamp lights, and | (POWER OFF→ | ON) | |
|
| the message display flashes. |
|
| |
T REEL TORQUE | T REEL TORQUE | If an abnormal torque applied to the | STOP |
| |
ERROR | ERR | motor is detected, the AUTO OFF lamp lights, and | (POWER OFF→ | ON) | |
|
| the message display flashes. |
|
| |
UNLOAD ERROR | UNLOAD ERROR | If the tape has not been wound up during unloading, | STOP |
| |
|
| the AUTO OFF lamp lights, and the message display | (POWER OFF→ | ON) | |
|
| flashes. |
|
| |
WINDUP ERROR | WINDUP ERROR | If, after the total tape amount has been detected, the |
|
| |
|
| amount of tape wound up on the | STOP |
| |
|
| amount of tape supplied by the supply reel differ to an |
| ||
|
| abnormal extent while the tape is traveling in the | (POWER OFF→ | ON) | |
|
| forward or reverse direction, the AUTO OFF lamp |
|
| |
|
| lights, and the message display flashes. |
|
| |
|
|
|
|
| |
WINDUP REEL NOT | If, after the cassette has been inserted, the tape take- |
|
| ||
ROTA |
| up reel has not wound up the tape while the total tape | STOP |
| |
|
| amount is not detected and while the tape is traveling |
| ||
|
| in the forward or reverse direction, the AUTO OFF | (POWER OFF→ | ON) | |
|
| lamp lights, and the message display flashes. |
|
| |
|
|
|
|
| |
– 89 –