TEST IC CARD menu

Preparations

When an error to be logged has occurred, this unit enables information on the date and time of the occurrence of the error to be recorded in addition to the TC information in the log. Initial registration of the date and time is required in order for this information to be recorded. Bear in mind that if the unit’s power has been off for more than one week, it will be necessary to re-register the date and time.

How to register the date and time

When TEST and then the F13 key are pressed, a menu appears.

1.Press the center cursor key.

The year display at the top center of the front panel now appears as a white-on-black display.

2.Use the number keys to change the date and time.

Use the cursor keys (2, 1) to move the white-on-black display to the location where the information is to be changed, and change the information using the number keys.

3.After having changed and registered the date and time information, press the ENT key to enter it.

F13

F12

F11

F10

F9

F1

F2

F3

F4

F5

F6

F7

F8

°TEST IC CARD ERROR_LOG MONITOR menu

F13

F12

F11

F10

F9

F1

F2

F3

F4

F5

F6

F7

F8

– 18 –