41
4
Chapter 4
Adjustments and settings for recording
Display item What is displayed Status when display appears
FTotal length of
cassette tape
¢¢¢min This indicates the total length of the cassette tape.
GSuper iris ON/
super black ON
S
B
SB
This appears when S.IRIS has been set to ON.
This appears when S.BLK has been set to ON.
This indicates the color temperature during the AWB operation.
HColor temperature ¢.¢KThis indicates the color temperatures assigned to the A, B, and PRE
positions of the WHITE BAL switch. (These may be memory values
during AWB operation or menu setting values.) This indication does not
appear in the ATW MODE.
JD.ZOOM DZ
This appears when the D.ZOOM mode has been established. When the
FOCUS mode has been selected, it flashes only while the mode is in effect.
IShutter
speed/mode
11/¢¢.¢
1/100 - 1/2000
SUPER V
This indicates that the shutter speed is set to SYNCHRO SCAN.
This indicates that a fixed shutter speed has been set.
This appears when the SUPER V (mode with high vertical resolution)
has been set.
DUnit’s REC display REC This appears when the extender unit and 26-pin connector (BOTH)
have been connected to indicate the unit’s recording status using
characters. It lights during recording, and it flashes while the unit’s
mode is transferring to recording or when a warning has been issued.
ERemaining tape ¢¢¢min
= END
= INH
Under normal conditions, “¢¢¢min” lights, and this starts flashing while
the tape is reaching the end.
When the tape has reached the end, “=END” lights.
When recording has been inhibited, “=INH” lights.
CRemaining battery
charge/voltage
¢¢.¢V
¢¢¢%
EMP
MAX
This indicates the remaining battery charge in 0.1V increments.
This indicates the remaining digital battery charge in percent.
This appears when the battery has no charge left.
This appears when the battery has a full charge.
BBattery type AJ-BP490 to AC-ADPT This indicates the type of battery selected on the menu. “AC ADPT”
appears when an AC adapter has been input.
@Interval, pre-rec
display
i (flashing)
iREC (lighting)
iREC (flashing) ¢¢h¢¢m/¢¢s
P-REC (flashing) ¢s
This appears in the INTERVAL REC mode during the times when the
operation of the REC button is not acknowledged before the start of or
at the end of recording.
This appears during an INTERVAL REC operation.
This appears during INTERVAL REC standby to indicate the wait time
until the next recording.
This indicates the amount of time remaining until the end of the set PRE
REC time during PRE REC operation.
AID recording
display
ID This appears when the setting to superimpose the ID onto the camera
image and record the image with the ID has been established.
?Zoom display Z00 to Z99 This indicates the amount of zoom. Note that this item is not displayed
even if the display setting is ON if the lens is not equipped with a zoom
position return function.