DeVillbiss Air Power Company DV54 manual advanced menu controls, Advanced Menu Controls, Shut Down

advanced menu controls

EN

Press the delay button to activate the comfort delay feature. The airflow pressure will drop to the prescribed comfort delay pressure.

In the final 10 minutes of the delay period, the pressure will gently rise to the pressure prescribed for your therapy. You may repeat the comfort delay by pressing the delay button again if you have not fallen asleep during the first use.

Comfort Delay Feature in AutoAdjust Mode

When you use the comfort delay feature while your IntelliPAP is operating in AutoAdjust mode, the airflow you receive at the beginning of your therapy is the lowest pressure prescribed by your physician when the device was setup.

You do not need to activate the comfort delay; it will turn on automatically. The airflow pressure will rise only to the low pressure setting and remain there for the duration of the delay period. The AutoAdjust will not adjust the pressure setting during the comfort delay period, allowing you to fall asleep without responding to early respiratory events.

Shut Down

Press the ON/OFF button to turn the device off. You may also simply remove your mask. After a few seconds the device will display the message “Mask Off. Please check mask fit.” If you do not put the mask on again the device will automatically turn off in about 20 seconds. Pressing any button will remove the message from the display.

NOTE–If the DeVilbiss IntelliPAP does not turn off automatically, the feature may have been disabled. In this case you must manually turn the device off.

Advanced Menu Controls

With the device on, press the “Next” or “Previous” buttons on the keypad to scroll through the items on the display. Not all of the features in the table below are available in all models; some are optional and some depend on what your physician and/or home care provider has selected. The table shows the items you may see, and describes the feature associated with each item. Also, some features are only available in AutoAdjust Mode or with the DeVilbiss SmartLink™ Therapy Management Module – these are noted in the ‘Mode’ column below. If you do not see some of these options, your model or configuration does not support them.

Name	Symbol	Function
PREVIOUS ITEM		Pressing this button displays the previous menu option.
NEXT ITEM		Pressing this button displays the next menu option.
SETTING CHANGE		These buttons allow you to adjust the setting that is
		shown on the display.

Please note that the values displayed are examples only.

A-DV54 11