DeVillbiss Air Power Company Intellipap Enable Menu List, advanced menu controls, A-DV54, Mode

advanced menu controls

EN

Display Example	Mode	Description
Firmware Version	All	Shows version of installed firmware.
V0.01 01/06/2006
Serial Number	All	Shows the serial number of the device.
HD123456
		SmartCodeTM is used for therapy management
SmartCode
		reporting; therapy information is encoded in a series
FF28D9	All
		of letters and numbers, and includes a special
		character for error checking to ensure accuracy.

Intellipap Enable Menu List

The Enable menu is available in all modes and is a sub-menu that allows you to control various functions of your IntelliPAP. It is accessed by pressing the down button while in this Advanced Menu.

Display Example	Description
	This option controls the Auto-ON feature, which automatically
Auto-ON
	starts the flow of air after breathing once or twice into the
Enabled
	mask.
		This option controls the Auto-OFF feature, which
Auto-OFF		automatically stops the flow of air after taking off the mask.
Enabled	The device may require up to 30 seconds to turn OFF
	depending on the kind of mask used.
	This option controls the mask fit check feature. The air flow to
		your mask is constantly measured and if the amount of airflow
Mask Fit Check
		exceeds 95 liters/minute for more than 10% of the time used,
Enabled
	a	notification will be created. This notification will be displayed
	the next time you use the IntelliPAP.

Exit Menu Press 

Pressing the up key exits the Enable menu.

A-DV54 13