DeVillbiss Air Power Company DV54 travel/dc operation/ supplemental oxygen, Supplemental Oxygen

EN

travel/dc operation/ supplemental oxygen

IntelliPAP TRAVEL INFORMATION

International Power Changes

Your DeVilbiss IntelliPAP is equipped with a universal power supply. This means that it is automatically capable of accepting line voltages of 100 to 240V~ 50/60Hz. You do not need to make any adjustments to the device if you are traveling to another country where the line voltage is different than your domestic line voltage. Simply contact your home care provider for the correct style power cord for the region in which you will be traveling (refer to Accessories/Replacement Items for the correct part number).

Altitude

Your IntelliPAP automatically compensates for changes in altitude between sea level and 9000 ft (2750  m). You do not need to make adjustments to the device for changes in altitude.

IntelliPAP DC OPERATION

Battery Power

Your IntelliPAP can be operated from a 12V DC power source in a motor home, boat or other recreational vehicle. The power source can be used with a 12V DC accessory cable or a 12 V DC stand-alone battery. Both parts are available from your home care provider (refer to Accessories/Replacement Items for the correct part numbers). Both accessory cables are required for stand-alone battery operation. The stand-alone battery connection uses clamps that attach to the terminal connections of the battery.

NOTE–The heater for the IntelliPAP’s humidification system will not operate directly from a 12V DC power source. If you need humidification, passover humidification is still available. Alternately, instead of connecting12V DC power directly to the IntelliPAP, you can pass the DC power through an inverter that will deliver AC power to the system. This will allow the heater to function. The power rating of the inverter must be at least 200 watts @ 110V~ / 400 watts @ 220V~.

NOTE–The IntelliPAP will automatically switch power sources between AC and 12V DC if both sources are available. If your unit is connected to both AC and 12V DC power sources, it will operate on AC power as long as AC power is present, and automatically switch to 12V DC power if AC power is lost. When AC power is restored, it will return to the AC source. You do not need to reset or adjust any settings when the power source switches, but remember that your heater will not operate on 12V DC.

SUPPLEMENTAL OXYGEN

Supplemental oxygen is sometimes prescribed in addition to CPAP for treatment of Obstructive Sleep Apnea. If your physician prescribed oxygen for your sleep therapy, you can add the oxygen in one of two ways:

1.Obtain the optional oxygen adapter (part #7353D-601) from your home care provider and connect it to the outlet port on the IntelliPAP. Connect one end of the air supply

16A-DV54