EN
cleaning
IntelliPAP CLEANING
WARNING
To avoid electric shock, always unplug the power cord from the wall outlet power source before cleaning.
Device Cabinet
1.Unplug the IntelliPAP from the power source. Wipe the enclosure with a clean, damp cloth every few days to keep the enclosure dust free.
2.Allow the device to dry completely before plugging it into a power source.
Filters
1.The
2.To clean, remove the dark outer foam filter from the frame.
3.Wash the filter in a solution of warm water and dishwashing detergent, and rinse with water. Allow the filter to dry completely. If the filter (part
4.Ensure the filter is completely dry before installation and use.
Fine Particle Filter (Optional)
1.If you have an optional fine particle filter (part
2.Install the fine particle filter behind the standard filter.
Tubing
The air supply tubing should be cleaned daily. Remove the tubing from the device and mask. Use a mild detergent and water to clean the inside of the tubing. Rinse the tubing and allow to air dry.
Mask and Headgear
Clean the mask and headgear according to the manufacturer’s instructions.