Setting of Menu Items
!Maintenance menu
°°R/B GAIN°°
R | GAIN | :+000 |
B | GAIN | :+000 |
4 Gain adjustment menu
The gain of R, B GAIN is adjusted.
The difference from the state of being
≥The numeral value displayed after nor- mal ending of AWB is “0” for both of R, B.
°°DTL°°
DTL | :ON |
TOTAL DTL LVL | :+00 |
H DTL LVL | :11 |
CRISP | :02 |
LVL DEPENDENT | :2 |
PEEK FREQUENCY | :10 |
KNEE APERTURE | :ON |
KNEE APA.LVL | :10 |
SLIM DTL | :OFF |
DTL(+) | :+00 |
:+00 | |
DTL CLIP | :0 |
DTL SOURCE | :(B+G)/2 |
5 Detail adjustment menu
DTL: Setting of valid/invalid of detail func- tion.
TOTAL DTL LVL: Horizontal and verti- cal detail level adjustment.
H DTL LVL: Horizontal DTL component is adjusted independently of DTL ad- justed by TOTAL DTL.
CRISP: It functions to eliminate slight detail component and to reduce the noise level.
LVL DEPENDENT: It suppresses the de- tail of low brightness level. The bright- ness level to be suppressed is adjusted here.
PEAK FREQUENCY: It lifts up the detail component, and selects the central fre- quency.
KNEE APERTURE: It functions to em- phasizes the detail component of the por- tion with knee applied.
KNEE APA.LVL: It sets the degree of knee aperture.
SLIM DTL: It validates the function of slimming the portion where the detail is thick and emphasized.
23
