14
Operation Procedure
1Turn on the power of each equipment.
2Properly adjust the light for the ob-
ject.
3Adjust the flange back of the lens, the
iris and the focus.
≥ Flange back must be adjusted when
the camera is used for the first time or
after replacement of the lens.
4Adjust the white balance.
≥ This adjustment is needed when the
camera is used for the first time or af-
ter leaving unused for a long time.
≥The adjustment is necessary when the
lighting condition or brightness is changed.
≥After adjusting the white balance once,
re-adjustment is not needed under the
same condition.
5Adjust the black balance.
≥This adjustment is needed when the
camera is used for the first time or af-
ter leaving unused for a long time.
≥The adjustment is necessary when the
ambient temperature is greatly changed
or at the change of season.
≥After adjusting the black balance once,
re-adjustment is not needed under the
same condition.
6Start shooting.
(After shooting, be sure to turn off the
power of each equipment connected.)