8
BREAKER
ZOOM/
FOCUS
SDI OUT
1
2
1
/
F
720
PROGRESSIVE
How to Install_How to set the lens
≥Standard 2/3q bayonet type (B4 mount) lens of any makers can be used*.
1Turn the lens fixing ring knob counterclockwise to remove the lens mount cap.
2Set the lens in place, and turn the lens fixing ring knob clockwise to precisely fix the
lens.
3Connect the lens cable to the lens connector.
4Connect the remote (zoom/focus control) cable to the zoom/focus connector on the
rear panel.
* Note that there are some lenses uncontrollable with respect to zoom, focus function.
Be sure to ask the dealer for the installation,
adjustment and connection of this equipment.
_How to install on the camera housing, pan/tilt head, tripod,
etc.
1Precisely set the camera on the camera housing, pan/tilt head, tripod, etc. by using
the camera set-screw hole (1/4-20UNC, 3/8-16UNC).
2When mounting the camera on a pan/tilt head, be sure to use proper tools and make
sure that there is no fear of falling off.
Remote (zoom/focus control) Cable
(When a pan/tilt head is used, connect
the cable to the pan/tilt head.)
Camera Cable
(To Lens Connector)
Lens Fixing Ring Knob