Panasonic AK-HC931BP manual Specifications, W during external power supply operation, Power supply

Specifications

Power supply:

DC 12 V (when external power is supplied) AC 150 V–240 V (when CCU is connected)

Power consumption:

33 W (during external power supply operation)

43 W (when CCU is connected)

indicates safety information.

Operating temperature
range:	32F to 104F (0C to +40C)
Storage temperature
range:	–4F to 140F (–20C to +60C)
Operating ambient
humidity:	Less than 85%
Weight:	Approx. 10.7 lbs (4.85 kg)
Dimensions:	5 (W)11-1/16 (H)14-3/8 (D) inch
	(excluding protrusions)
	126  280  365 mm

Basic items

1)	Pickup device:	2/3 million pixel ITCCD  3
2)	System:	GBR pickup system
3)	Color separation
	optical system:	f/1.4 prism
4)	Optical filters:	CC: 3200K, 4300K, 6300K, Cross
		Diffusion
		ND: CAP, Through, 1/4, 1/16, 1/64
5)	Lens mount:	Bayonet type
6)	Output standard:	SMPTE 296M/274M
7)	Sensitivity:	f/10.0, 2000 lux, 3200 K, white
		reflectance 89.9%
8)	Horizontal modulation: More than 45% (27.5 MHz)
9)	S/N ratio:	54 dB (Y: 30 MHz)

10)Horizontal frequency: 44.955 kHz, 750-line frame /33.716 kHz, 1125 line frame

11)Vertical frequency: 59.94 Hz, progressive /59.94 Hz, interlace

Input/output signals

1)	Mic input:	–20, –30, –40, –50, –60 dBm
		(XLR 3-pin female2)
		Gain selected by switch
2) INCOM:		0 dBm/600 ohms
		(XLR 5-pin, female2)
		(Mixing is controlled separately for
		PGM1 and PGM2.)
3)	Monitor output:	HD signals = 1Vp-p, 75 ohms (BNC)
		Output signals can be selected using
		the monitor output selector switch.
4)	QTV output:	VBS signal = 1 Vp-p, 75 ohms (BNC)
5)	G/L input:	1 BNC connector (tri-level SYNC)
6)	AUX output:	VBS signal = 1 Vp-p, 75 ohms (BNC)
		(when optional unit has been installed)

Control

1)	Power selection:	EXT, OFF, CCU
2)	USER SEL:	Functions specified by menu items
		can be allocated to the switch.

3)RET A/B selection: For selecting the return signal

4)Front tally selection: Front tally HIGH, LOW, OFF (VF unit)

5)Viewfinder marker

selection:	Center marker, safety zone, 4:3 marker
6) Gain selection:	LOW, MID, HIGH

7)Output selection: CAM, BAR, TEST

8)White balance mode: A, B, preset

9)Shutter speed

selection:	1/100, 1/125 1/250, 1/500, 1/1000,
	1/2000

10)AWB, ABB settings

11)Menu selection

12)CALL SW

13)	INCOM:	MIC ON/OFF, receive or PGM level
14)	MIC setting:	MIC power, MIC gain, MIC1 selection

15)Optical filter setting: REM, LOCAL selection and LOCAL setting

*When the CCU is connected, the selection functions for 6) to 10) are not effective.

Weight and dimensions shown are approximate. Specifications are subject to change without notice.

31