-6-
INSTALLATION

Installation of the Camera Adaptor

1. Mounting the Camera Adaptor

1-1 Mount the Camera Adaptor with Camera Handle to
the camera while engaging the 68-pin connector.
68-pin connector.
1-2 Tighten two Camera Adaptor Holding Screw/knob
(2) firmly and make sure the adopter is securely
fixed to the camera.
Tighten two Camera Adaptor
Holding Knobs.
CAUTION:
Mount the Camera Adaptor by sliding it straight
and engaging the connectors and lock mechanism
in order not to bend the pins of the connector and
not to make a short circuit.

2. Removing the Camera Adaptor

2-1 Loosen two Camera Adaptor Holding Screw/Knob
(2) on the Camera Adaptor.
Loosen two Camera Adaptor
Holding Knobs.
2-2 Remove the Camera Adaptor while pressing up the
Release Button underneath the camera.
Release
Button.