How to change the position of the connector panel
The position of the connector panel can be changed from the rear panel to the bottom panel.
1Remove the three screws of the bottom and side panels to remove the blank panel.
Remove the blank panel.
2 Remove the three screws of the rear and side panels to | (Rear view) |
remove the connector panel. |
|
3 Secure the blank panel to the rear panel using the | (Rear view) |
screws. |
|
4 Remove the two rubber feet of the blank panel. |
|
| Attach the blank panel. |
5Secure the connector panel to the bottom panel using the screws.
Attach the connector panel.
Screws (!3)
Screws (!3)
Connector panel
Screws (!5)
Rubber feet
Screws (!3)
21