Panasonic BL-C20 operating instructions POP server authentication may be required by your ISP

Operating Instructions

Setting			Description
How to	You can select the authentication method: [No authentication],
authenticate	[POP before SMTP authentication] and [SMTP authentication].
	POP server authentication may be required by your ISP. In
	that case, set POP before SMTP authentication.
	•	No authentication: No authentication when sending an e-
		mail.
	•	POP before SMTP authentication: Some SMTP servers
		that send e-mails do not have an authentication feature.
		Therefore, the camera uses the authentication of a POP
		server that receives e-mails, before sending e-mails.
	–	POP3 Server	If you set a server IP address, set 4
		IP Address or	numbers (0—255) and 3 periods, such as
		Host Name*1:	"192.168.0.253". Note that "0.0.0.0" and
			"255.255.255.255" are not available. Or
			set a host name (0—255 characters).
	–	Port No.:	Enter a number (1—65535). Usually set
			to 110.
	–	Login ID*2:	If your ISP requires a login ID to log in to
			a POP3 server, set it (1—63 characters).
	–	Password*2:	If your ISP requires a password to log in
			to a POP3 server, set it (0—63
			characters).
	•	SMTP authentication: Users are authenticated by user
		name and password on the SMTP server. Your ISP must
		support the SMTP authentication. Only the LOGIN and
		PLAIN authentication mechanisms are supported.
	–	Login ID*2:	If your ISP requires a login ID to log in to
			an SMTP server, set it (1—63
			characters).
	–	Password*2:	If your ISP requires a password to log in
			to an SMTP server, set it (0—63
			characters).

*1

*2

Note that [Space], ["], ['], [&], [<] and [>] are not available. Note that ["] is not available.

94