REMOTE Specifications
REMOTE operation is possible on this monitor using the
GPI terminal
Each of the items in the GPI screen are compatible with the following terminals. You can assign functions to each terminal in the menu GPI screen (J page 20).
The functions assigned to each terminal operate when the GND (5 Pin) is connected (ON) or open (OFF).
| Pin number | Signal |
|
|
|
| 1 | GPI1 |
|
|
|
| 2 | GPI2 |
|
|
|
GPI Terminal (9P) | 3 | GPI3 |
|
|
|
| 4 | GPI4 |
|
|
|
| 5 | GND |
|
|
|
| 6 | GPI5 |
|
|
|
| 7 | GPI6 |
|
|
|
| 8 | GPI7 |
|
|
|
| 9 | GPI8 |
|
|
|
g Operating conditions
Level operation: operates when GND is connected.
Edge operation: operates when GND changes from
open to connected.
*If you have assigned a level operation function to more than one terminal, the function operates as long as one of the terminals is connected.
Assignment items | Function | Operating conditions |
|
|
|
UNDEF | No settings (no terminal assignment functions) | — |
|
|
|
MARKER1 | Switches the marker display of the marker | Level operation |
ON/OFF | decided in “GPI PRESET1” (J page 14) in the | (Connected: ON, Open: OFF) |
| “MARKER” menu. |
|
MARKER2 | Switches the marker display of the marker | Level operation |
ON/OFF | decided in “GPI PRESET2” (J page 14) in the | (Connected: ON, Open: OFF) |
| “MARKER” menu. |
|
|
|
|
MARKER | Reduces the brightness of the background | Level operation |
BACKHALF | outside the marker displayed in “GPI PRESET1” | (Connected: ON, Open: OFF) |
| (J page 14) by 50%. |
|
MARKER | Reduces the brightness of the background | Level operation |
BACKBLACK | outside the marker displayed in “GPI PRESET1” | (Connected: ON, Open: OFF) |
| (J page 14) to 0%. |
|
|
|
|
CENTER MARKER | Switches the center marker display ON/OFF. | Level operation |
| (When other markers are being displayed, this is | (Connected: ON, Open: OFF) |
| superimposed on the other markers) |
|
|
|
|
INPUT SEL. VIDEO | Switches the input system to VIDEO. | Edge operation |
|
|
|
INPUT SEL. Y/C | Switches the input system to Y/C. | Edge operation |
|
|
|
INPUT SEL. SDI1 | Switches the input system to SDI1. | Edge operation |
|
|
|
INPUT SEL. SDI2 | Switches the input system to SDI2. | Edge operation |
|
|
|
INPUT SEL. | Switches the input system to YPBPR/RGB. | Edge operation |
YPBPR/RGB |
|
|
SD ASPECT | Sets the aspect ratio settings when using SD signal | Level operation |
| input. (Disabled when using HD signal and PC signal) | (Connected: 16:9, Open: 4:3) |
|
|
|
SCAN | You can switch the scan mode between “UNDER” | Level operation(Connected: UNDER, |
| and “NORMAL”. (Disabled when using PC signal) | Open: NORMAL) |
|
|
|
Lights the red tally. | Level operation | |
|
| (Connected: ON, Open: OFF) |
Lights the green tally. | Level operation | |
|
| (Connected: ON, Open: OFF) |
MONO | Switches between color and monochrome | Level operation (Connected: |
| (MONO). (Disabled when using PC signal) | Monochrome, Open: Color) |
GAMMA SELECT | Used to select the gamma curve. (Disabled when | Level operation (Connected: FILM |
| using PC signal) | mode, Open: NORMAL mode) |
RGB SYNC*2 | Selects the SYNC when using | Level operation |
| input. | (Connected: EXT, Open: |
*1 When both
*2 This is only enabled when
23