MAIN MENU (continued)

INPUT SELECT

CONTROL

Item

Setting

Description

 

 

 

FORMAT

AUTO

For selecting the signals whose input is to

 

1080/60I

be accepted in the YPBPR mode and in the

 

1080/50I

RGB mode.

 

1080/30P

The signals can be set for each mode, and

 

1080/25P

when the MODE item setting is switched

 

1080/24P

from YPBPR to RGB or vice versa, the

 

1080/24PsF

mode is automatically switched so that the

 

1035/60I

signal format which has been set for the

 

720/60P

mode now set is accepted.

 

720/50P

AUTO:

 

576/50I

All supported signals are accepted.

 

480/60P

1080/60I:

 

480/60I

1080/60I or 1080/59.94I format signals

 

 

are accepted.

 

 

1080/50I:

 

 

1080/50I format signals are accepted.

 

 

1080/30P:

 

 

1080/30P or 1080/29.97P format signals

 

 

are accepted. (This setting takes effect

 

 

only when YPBPR is selected.)

 

 

1080/25P:

 

 

1080/25P format signals are accepted.

 

 

(This setting takes effect only when

 

 

YPBPR is selected.)

 

 

1080/24P:

 

 

1080/24P or 1080/23.98P format signals

 

 

are accepted. (This setting takes effect

 

 

only when YPBPR is selected.)

 

 

1080/24PsF:

 

 

1080/24PsF or 1080/23.98PsF format

 

 

signals are accepted. (This setting takes

 

 

effect only when YPBPR is selected.)

 

 

1035/60I:

 

 

1035/60I or 1035/59.94I format signals

 

 

are accepted. (This setting takes effect

 

 

only when YPBPR is selected.)

 

 

720/60P:

 

 

720/60P or 720/59.94P format signals

 

 

are accepted.

 

 

720/50P:

 

 

720/50P format signals are accepted.

 

 

(This setting takes effect only when

 

 

YPBPR is selected.)

 

 

576/50I:

 

 

576/50I format signals are accepted.

 

 

480/60P:

 

 

480/60P format signals are accepted.

 

 

480/60I:

 

 

480/59.94I format signals are accepted.

 

 

 

COMPONENT

SMPTE

For selecting the input level of the Y/PB/PR

LEVEL

B75

signals.

 

 

SMPTE: This is selected when the signals

 

 

are to be output from an MII VTR.

 

 

B75: This is selected when the signals

 

 

are to be output from a Betacam

 

 

VTR.

 

 

 

RGB-SYNC

G-ON

For switching the connector where the sync

 

EXT

signal is to be accepted.

 

 

G-ON:This is selected when the sync

 

 

signal has been superimposed onto

 

 

the G signal.

 

 

EXT: The sync signal is accepted at the

 

 

SYNC connector among the analog

 

 

component/RGBS connectors.

 

 

 

Item

Setting

 

Description

 

 

 

 

CONTROL

LOCAL

For selecting where the operations are to

 

REMOTE

be initiated.

 

 

 

 

LOCAL: Only operations initiated from the

 

 

 

main controls can be performed.

 

 

 

Remote control operations cannot

 

 

 

be performed.

 

 

 

REMOTE: Remote control operations can be

 

 

 

performed,

but no

operations

 

 

 

initiated by the main controls can

 

 

 

be performed although there are a

 

 

 

few exceptions to this.

 

 

 

<Notes>

 

 

 

 

≥ When REMOTE has been selected, the

 

 

“

” lock mark appears on the status

 

 

display.

 

 

 

 

≥ When REMOTE has been selected, only

 

 

the settings of the CONTROL item and

 

 

LOCALENABLE item on the CONTROL

 

 

screen can be changed as menu

 

 

operations.

 

 

 

 

 

LOCAL ENA

DIS.

For selecting whether to enable the input to

 

INPUT

be switched to the main controls when

 

 

REMOTE has been selected.

 

 

 

DIS: When REMOTE has been selected,

 

 

 

the input can no longer be switched

 

 

 

to the main controls.

 

 

 

INPUT:Even when

REMOTE

has been

 

 

 

selected, the input can be switched

 

 

 

to the main controls.

 

 

 

 

BACKLIGHT TIME

 

For displaying the total operation time of

 

 

the backlight.

 

 

 

 

 

 

 

 

The underlined setting indicates the factory setting mode.

22