15
Getting Started
8Setup Windows
Power Switch
Power Indicator
7Turn your computer on
Press the power switch and hold it for approximately
one second until the power indicator turns on before
releasing it.
Do not press the power switch and hold it for more than four seconds; this
will cause the power to be turned off forcibly.
Do not press the power switch repeatedly.
Once the computer is powered off, you must wait at least ten seconds before
powering it on again.
CAUTION
Do not press any key or move the mouse until [Windows XP Professional
Setup] is displayed.
CAUTION
1At [Welcome to the Windows XP Setup Wizard], select [Next].
2After reading the agreement, select [I accept this agreement] or [I don’t accept
this agreement], then select [Next].
NOTE
If [I don’t accept this agreement] is selected, the Windows setup will
be aborted.
3Select settings for your region, then select [Next].
4Enter your name and organization and then select [Next].
5Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows can-
not be operated.
NOTE
The message showing an IP address conflict may be displayed before the
wireless display setting ( Step 9 on page 17) is finished. Close the mes-
sage and continue operation.