Panasonic CF-08 6 Make the network setting.

21
Before making the settings for the wireless display, check the following server set-
tings.
zIs the remote desktop allowed to use?
zIP address and subnet mask (if the name server is inside the network, use the
server name instead.)
zUser name and password
6 Make the network setting.
When making connections with a LAN
zFor the following operation, make
sure the LAN is enabled.
Tap [ETHERNET1], and then tap
[File] - [Enable].
The icon will change from to
.
When making connections with a wire-
less LAN
ADouble-tap [ETHERNET1]. ADouble-tap [WIRELESS LAN1].

BTap the [IP address] tab, and set an IP address and subnet mask.
If DHCP is available on the network If DHCP is not available on the network
Select [Obtain an IP address via
DHCP].
Select [Specify an IP address], and
enter the IP address, subnet mask and
if necessary, default gateway.

CTap [OK].
zWhen making connections with a wireless LAN
ADouble-tap on the desktop, and then tap [Wireless LAN].
BTap the [Wireless Information] tab, and then tap the access point from the
list.
Now, select settings as follows according to your own network environ-
ment.
CTap [Connect].
CF-08.book 21 ページ ２００６年４月６日 木曜日 午後６時３８分