50
Bluetooth
To make connections with the serial port
Tap the [Serial Port] tab, and make the following procedure.
ATurn on the Bluetooth device.
BTap [Select Device] (A).
zIf you add the check mark for [Auto Reconnect] (C), the connection will
be made automatically when Bluetooth is enabled.
CTap [Search] (D).
DTap the Bluetooth device name you want to connect from the list box (E).
ETap (F ) .
FTap [Connect] (B).
When the [Enter PIN code] screen appears, enter the pin code, and then tap
[OK].
When the connection is active, the [Status] display shows “Connected.”
zTo terminate the connection
Tap [Disconnect] from the [Serial Port] tab.
When the connection is broken, the [Status] display shows “Not con-
nected.”
CF-08.book 50 ページ ２００６年４月６日　木曜日　午後６時３８分