9-36 Putting of the Sheet Cautions for Setting the Keyboard

LCD Cushion Sheet LCD Cushion Sheet

KB CNT Hole Cushion

Gasket E

KBD Waterproof Sheet C

Palmrest Waterproof Sheet L

TP Tape

Palmrest Waterproof Sheet R

Click Button Plate

0 0.5mm
0 0.5mm
0 0.5mm
Because the sheets described on this page are waterproof sheets,
the whole parts should be put pressure after attaching.
(Especially, put pressure around the sheets.)
*Apply the load to attach.
30 to 40N (3.0 to 4.0Kgf)
Avoid running over.
0.5 to 1mm Avoid running over.
0.5 to 1mm
Avoid coming over.
0 to 0.5 mm Avoid coming over.
0 to 0.5 mm
Attach it using the jig
Attach it using the jig
Attach it using the jig
Fold over the front and attach it.
Avoid running over other sheets. Fold over the front and attach it.
Avoid coming over.
0 to 0.5 mm
Match to the circles.
0 to 0.5mm
Fit to the wall of the end side, and
put the surplus to the Cabinet side.
Ensure it does not come
over the end of the rib.
Ensure it does not come
over the end of the rib.
The paste should be
put the left side.
0.5 1.5mm
0 0.5mm
0 0.5mm

Keyboard Ass’y

KBD Connector LID Ass’y

Connect the Keyboard FFC

Set using the jig.
Connect part the
LCD CABLE/
KBD FFC
Use the fixing jig
Avoid running over the
Top Case
Incline to the right.
After inserting the FFC,
lock the Connector.

Keyboard Plate(L)

Keyboard Plate(R)

KB Connector Lid

Keyboard Connector Lid Sheet

Screw

Screw Screw Screw

Screw
Screw
Screw

Keyboard Connector Lid Ass’y

Order of fixing
Screw Screw Screw
Screw Screw Screw Screw
Fix from the Hinge side.
Fix from the Hinge side.
Before setting the KBD
Plate (L) and the KBD
Plate (R), press on the
positions (four) with the
two-sided tapes.
30N(3.0Kgf)
Note:
Hold the Connector part when
connecting/disconnecting.
Do not bend at the foot of
stiffening plate.
Do not bend at the foot of
stiffening plate.
Connect the Connector
to the dotted part.
Connect the
LCD CABLE
Connect the
KBD FFC
Safety Working
Rotate the LCD to make the
LCD display face front after
setting the KBD.
Apply the load to attach. 30 to 40N
(3.0 to 4.0 Kgf)
KBD FFC
insert parts
(Note)
Please exchange the KB Connector Lid Ass'y for the
reserved that stores the KB cables under the keyboard,
when you do the following work. Because KB connector
Lid Sheet takes some time for the restoration when it
peels off once.
- Exchange LCD cable
- Remove/Exchange the Keyboard
Moreover, if you would like to reuse the removed sheet,
please leave it on at least 1 day until the elasticity of the
sheet returns.
KB Connector Lid <K34>: DFHM0406ZA
KB Connector Lid Sheet <K39>: DFHR3D91ZA