10
Getting Started
6
Turn your computer on
Slide the power switch toward the rear of the computer and hold it for approximately one
second until the power indicator turns on before releasing it.
Power Switch
Do not slide the power switch repeatedly.
Once the computer is powered off, you must wait at least ten seconds before pow-
ering it on again.
2
1
4

Connect your computer to a power outlet

Be sure the AC adaptor is connected until completing Step
8
on page 11.
Handling the AC adaptor
Do not twist or pull the AC power cord forcefully. Doing so may damage the
connections.
Use only the specified AC adaptor with your computer. Using an AC adaptor other
than the one supplied might damage the battery and/or the computer.
When the DC plug is not connected to the computer, disconnect the AC cord from
your AC wall outlet.
Problems such as sudden voltage drops may arise during periods of thunder and
lightning. Since this could adversely affect your computer, an uninterruptible power
source (UPS) is highly recommended unless the battery pack is installed.
Power Indicator
5

Open the display

1Slide the latch located at the front.
2Lift open the display.
First-time Operation
4Match the mark on the battery pack cover to the mark on the computer and slide the
cover back into place.
4Mark
If the cover is not attached properly, the battery may fall out while the computer
is being carried.
3
2
1
CAUTION
CAUTION
CAUTION